Intel® Server Board S1200V3RP TPS Platform Management Functional Overview
Revision 1.2
Diagnostic Beep Code Support
PECI Thermal Management Support
Integrated Remote Media Redirection
Lightweight Directory Access Protocol (LDAP)
Intel
®
Intelligent Power Node Manager
Support***
* Basic management features provided by Integrated BMC
**Advanced management features available with optional Intel
®
Remote Management Module 4
*** Intel
®
Intelligent Power Node Manager Support requires PMBus*-compliant power supply
6.3 Advanced Configuration and Power Interface (ACPI)
The server board supports the following ACPI states.
Table 16. ACPI Power States
Working.
The front panel power LED is on (not controlled by the BMC).
The fans spin at the normal speed, as determined by sensor inputs.
Front panel buttons work normally.
Sleeping. Hardware context is maintained; equates to processor and chipset clocks
being stopped.
The front panel power LED blinks at a rate of 1 Hz with a 50% duty cycle (not
controlled by the BMC).
The watchdog timer is stopped.
The power, reset, front panel NMI, and ID buttons are unprotected.
Fan speed control is determined by available SDRs. Fans may be set to a fixed
state, or basic fan management can be applied.
The BMC detects that the system has exited the ACPI S1 sleep state when the BIOS
SMI handler notifies it.
Supported only on Workstation platforms. See appropriate Platform Specific Information
for more information.
Soft off.
The front panel buttons are not locked.
The fans are stopped.
The power-up process goes through the normal boot process.
The power, reset, front panel NMI, and ID buttons are unlocked.