BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
are applied. If Load User Default Values is selected, the system is restored to previously saved
User Default Values.
To access this screen from the Main screen or other top-level “Tab” screen, press the right or
left arrow keys to traverse the tabs at the top of the Setup screen until the Exit screen is
selected.
Note: There is a Legal Disclaimer footnote at the bottom of the Save & Exit screen:
*Certain brands and names may be claimed as the property of others.
This is reference to any instance in the Setup screens where names belonging to other
companies may appear. For example “LSI*” appears in Setup in the context of Mass Storage
RAID options.
Figure 46. Save & Exit Screen
Screen Field Descriptions:
1. Save Changes and Exit
Option Values: <None>
Help Text:
Exit BIOS Setup Utility after saving changes. The system will reboot if required.
The [F10] key can also be used.
Comments: Selection only. Select this line and press the <Enter> key to exit
Setup with any changes in BIOS settings saved. If there have been no changes made in
the settings, the BIOS will resume executing POST.
To Next Page
Loading...
Need help?
General
