BIOS Architecture Intel® Server Board SE7520BD2 Technical Product Specification
50 Revision 1.3
3.2.6.1 Boot Settings Configuration Sub-menu Selections
Table 24. BIOS Setup, Boot Settings Configuration Sub-menu Selections
Feature Options Help Text Description
Quick Boot Disabled
Enabled
Allows BIOS to skip certain tests while booting. This
will decrease the time needed to boot the system.
Quiet Boot Disabled
Enabled
Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo instead of POST
messages.
Bootup Num-Lock Off
On
Select power-on state for numlock.
PS/2 Mouse Support Disabled
Enabled
Auto
Select support for PS/2 mouse.
POST Error Pause Disabled
Enabled
If enabled, the system will wait for user intervention
on critical POST errors. If disabled, the system will
boot with no intervention, if possible.
Hit <F2> Message Display Disabled
Enabled
Displays "Press <F2> to run Setup" in POST.
Scan User Flash Area Disabled
Enabled
Allows BIOS to scan the Flash ROM for user
binaries.
3.2.6.2 Boot Device Priority Sub-menu Selections
Table 25. BIOS Setup, Boot Device Priority Sub-menu Selections
Feature Options Help Text Description
Boot Device Priority
1st Boot Device Varies Specifies the boot sequence from the
available devices.
A device enclosed in parenthesis has
been disabled in the corresponding type
menu.
Number of entries will vary based on
system configuration.
nth Boot Device Varies Specifies the boot sequence from the
available devices.
A device enclosed in parenthesis has
been disabled in the corresponding type
menu.
3.2.6.2.1 Hard Disk Drive Sub-menu Selections
Table 26. BIOS Setup, Hard Disk Drive Sub-Menu Selections
Feature Options Help Text Description
Hard Disk Drives
1st Drive Varies Specifies the boot sequence from the available
devices.
Varies based on system configuration.
nth Drive Varies Specifies the boot sequence from the available
devices.
Varies based on system configuration.
To Next Page
Loading...
Need help?
General
