To Next Page

To Previous Page

Remote Control

-> *IDN? //Query identification of instrument

-> SYSTem:FUNCtion ONE //Set the power mode to 1-phase mode

-> FUNCtion AC //Set the output mode to AC mode

-> VOLTage 220 //Set the voltage RMS to 220V

-> FREQuency 60.0 //Set the frequency to 60Hz

-> CURRent:PROTection:RMS 90 //Set the current RMS protect value to 90A

-> CURRent:PROTection:PEAK 270 //Set the current Peak protect value to

270A

-> OUTPut ON //Turn on/off the output

-> MEASure:VOLTage? //Measure the output Vrms

-> MEASure:CURRent? // Measure the output Irms

-> MEASure:POWer? // Measure the output power

-> SYSTem:ERRor? //Query the error information of the instrument

-> SYSTem:CLEar // To clear the error queue

-> OUTPut:PROTection:CLEar //To clear the protection status

9.7 Demo Software Introduction

IT7800 series AC/DC power supply provides the following computer control

software, convenient for users to achieve different test control.The standard

version of the software can be downloaded from the official website, and the

optional version of the software needs to be purchased separately.

⚫ IT9000-PV7800 Demo Software（Standard）

IT7800 series power supply supporting remote control software, users can

directly download from the official website and install to the PC, to achieve

remote control equipment by visualization method, IT9000-PV7800 software

can achieve all the instrument panel operation. And the interface is simple and

convenient to operate. For detailed introduction, please refer to IT9000-PV7800

Software Manual.

⚫ ASS4000 Avionic & Shipboard Software（Optional）

IT7800 series power supply supporting ASS4000 series software to achieve

complex aviation, Marine and IEC regulatory certification testing, through the

software interface engineers can choose IEC61000-4-11, 4-13, 4-14, 4-28,

MIL704 and ABD regulations.

ITech IT7800 Series User Manual

Questions and Answers: