Quick Reference
Copyright ©ITECH Electronic Co., Ltd. 14
The rear panel of IT7800 series 15U and above series cabinets are the same.
Take IT7845-350-270 as an example, the rear panel is introduced as shown
below.
1: 10A output socket, which can be used when users need single-phase
220V/10A power supply
2: Output terminals and protective cover, remove the protective cover to show
ABCN terminals and sense terminals
3: Input terminal, connected to the instrument's power supply
1.6 Home-Screen Overview
IT7800 series power supply adopts touch screen design, Users can select and
switch directly by pressing or dragging on the screen.
The power supply can work in either single-phase mode or three-phase mode.
The working mode can be set in the system menu. The display interface of the
instrument is different under different modes.
To Next Page
Loading...
Need help?
General
