ITech IT7800 Series User Manual

Quick Reference
Copyright ©ITECH Electronic Co., Ltd. 16
The meter interface of phase A is shown as follow, the display parameters are
the same as single mode except for the phase indicator.
Introduction to Interface Symbols
The interface of IT7800 power supply will display the following symbols. All the
symbols and description are listed in the table below.
Char
Function description
Char
Function description
Shift
Compound key
Output is off
Output is on
Key operation is
locked
Single phase AC mode
Three phase AC mode
Single phase DC mode
Three phase AC+DC
mode
Split phase AC mode
Split phase AC mode
Split phase AC+DC mode
Split phase DC+AC
mode
Single phase DC+AC
mode
Single phase AC+DC
mode
Multi-channel AC mode
Multi-channel AC+DC
mode
Multi-channel DC mode
Multi-channel DC+AC
mode
The AC source is in
remote mode
Surge&Sag function
indicator
External Simulation Test
Function
Record log
LIST is running
LIST is finished
LIST function is waiting for
trigger
Sweep function is
waiting for trigger

ITech IT7800 Series Specifications

General

Brand	ITech
Model	IT7800 Series
Category	AC Power Distribution
Language	English