en-105
SPECIFICATIONS 12
12.7 CUTTING UNIT SPECIFICATION __________________________________________
Note: Specifications are subject to change without notice.
Product 674381 (Consists of 674376/77/78)
Deck Width 811.4 mm deck length 1012.5 mm (Includes rear discharge and lowest HOC)
Construction Heavy duty welded pressed steel
Blade Length 670 mm (26.38 Inches)
Number of Blades 3
Blade Tip Speed
5001 m/minute
(16408 feet/minute)
Overall Width Of Cut 183 cm (72 in)
Height of Cut 19 mm (0.75 Inches) to 88 mm (3.5 Inches) in 0.25 (1/4 Inch) Increments
Hydraulic Motor Speed 2355 rpm
Cutting Width 686 mm (27 Inches)
Transmission Fixed displacement hydraulic motors directly coupled to cutting unit.
To Next Page
Loading...
Need help?
General
