en-25
5 CONTROLS
5.2.H.4 ENGINE START
________________________________________________________
When the key switch is turned to the start’ position and the interlocks
are set, this screen is shown.
To start the engine, the parking brake must be applied, the mow
switch must be in the off position and the foot pedal must be in the
neutral position. When the glow plug timer ends, the engine will start.
The two LED lamps will flash green if the all of the above conditions
have been met.
5.2.H.5 THE ENGINE WILL NOT START
____________________________________________
When the ignition key is turned to the start position and the interlocks
are not set, this screen is shown.
• The parking brake is not applied.
• Mow switch is not in the OFF position.
• The foot pedal is not in the neutral position.
The engine will not start until all the items in the list are correct.
The two LED lamps will flash red until the above conditions have
been corrected as detailed above in 5.2.H.4.
5.2.H.6 MAIN MENU
__________________________________________________________
When the first screen is shown on the display, press the left
or right arrow keys to access the main menu.
To Next Page
Loading...
Need help?
General
