en-33
5 CONTROLS
5.2.H.20 FAULT LOG
__________________________________________________________
Turn the key switch to the “Run” position, navigate to the service
menu.
Use the up or down arrow keys until the green arrow
is next to fault log. Press the select button to select fault log.
The last 50 faults that the controller finds are recorded. When 50
faults are recorded, the fault that next occurs will write over the oldest
fault.
The inclinometer, records slopes of more than 22°.
The engine, records the engine shut downs because of overheating
or loss of oil pressure.
The service, records missed service.
Press the button to select, press the up and down
arrow keys to move the green arrow the faults will move with the last
error to the top of the screen.
Select the fault log to be accessed to accept then to show the
details.
These details show the date and time of the fault.
Press the button to return to previous menu.
To Next Page
Loading...
Need help?
General
