Jacobsen ES Series User Manual

en-31
5 CONTROLS
5.2.H.16 INCLINOMETER ____________________________________________________
Turn the key switch to the “Run” position, navigate to the pin menu.
Use the up and down arrow keys until the green arrow
is next to Inclinometer. Press the select button to select
Inclinometer.
Use the up and down arrow keys until the green arrow
is next to installed or not installed.
Press the select button to accept.
Press the back button to return to previous menu.
5.2.H.17 SET DEFAULT PARAMETERS _________________________________________
Turn the key switch to the “Run” position, navigate to the pin menu.
Use the up and down arrow keys until the green arrow
is next to set default parameters. Press the select button to
select set default parameters.
Press and hold the select button for five seconds to reset the
mower to default parameters.
Press the back button to return to previous menu.

Jacobsen ES Series Specifications

General

Brand	Jacobsen
Model	ES Series
Category	Lawn Mower
Language	English