en-29
5 CONTROLS
5.2.H.13 ENTER PIN _________________________________________________________
Turn the key switch to the “Run” position, navigate to the vehicle
settings menu.
Use the up and down arrow keys until the green arrow
is next to pin.
Use the arrow keys to highlight the correct number. Press the select
button to enter the number and to advance to the next position.
Repeat until all four numbers of the pin have been entered.
Highlight the “C” and press the select button to clear the previous
number.
The initial pin number is 1001.
If the correct pin number has been entered the pin menu will be
displayed.
Press the button to return to vehicle settings menu.
NOTE: Managers are advised to change the pin number to stop
the machine parameters being changed.
To Next Page
Loading...
Need help?
General
