17
VTX A8 | Rigging Manual
6 - A8 RIGGING SYSTEM OVERVIEW
VTX A8 cabinets include a next-generation rigging system that is easy to use, simple to understand, and highly accurate. VTX A8 enclo-
sures are transported vertically on carts of four using the VTX A8 VT Vertical Transporter cart accessory. During transportation, all four
cabinets travel collapsed and set to the 10-degree position. Cabinet-to-cabinet splay angle selection is done while the system is still on
the ground, simply by moving the angle selection quick release pin (QRP) to the desired position. When speakers are lifted off the VTX
A8 VT carts, an automatic Angle Lock mechanism engages to secure the cabinets to the selected position. The cabinets maintain their
splay positions until the user releases the Angle Lock mechanism, at which point the cabinet angles collapse back to 10 degrees and
the cabinets can be stored on the cart.
6.1 RIGGING CLOSEUP
FRONT CONNECTION POINT
REAR CONNECTION POINT
FRONT QRP
ANGLE SELECTION
REAR QRP
ANGLE LOCK MECHANISM
To Next Page
Loading...
Need help?
General
