56
VTX A8 | Rigging Manual
12 - THE VTX A8 SUSPENSION BAR
The VTX A8 SB is a lightweight suspension bar that can be used as an array frame or to implement pull-back for VTX A8 or B18 arrays.
When used for pull-back, the VTX A8 SB enables more downtilt than is possible using the VTX A8 AF alone, by attaching it to the bottom
cabinet of an array and then connecting to the suspension point for the rear of the array. The SB can also be attached to the top cabinet
of an array and used as a compact array frame. Two VTX A8 SB Suspension Bars can be used, one at the top of the array and one at
the bottom, for dual-point applications and added aiming flexibility. For more information on using the VTX A8 SB with the B18, refer to
the B18 Rigging Manual.
12.1 VTX A8 SB SUSPENSION BAR OVERVIEW
CENTER SHACKLE
ATTACHMENT LOCATION
SHACKLE POSITION FOR
SIDE-BY-SIDE SUSPENSION
SPEAKER ATTACHMENT
POINTS
To Next Page
Loading...
Need help?
General
