JBL VTX Series - Stacking the VTX A8 VT with the VT-TOP

24
VTX A8 | Rigging Manual
7.4 STACKING THE VTX A8 VT WITH THE VT-TOP
When the VTX A8 VT and VT-TOP are attached, several assemblies can be stacked together for storage.
STEPS:
• Rotate the VT wheels inward to point towards the opposite end of the cart.
• Line up the wheels with the wells on the VT-TOP.
• Stack the two parts together.
• Repeat until all VTs are stacked.
CAUTION:
• Make sure the VT and VT-TOP are pinned together and secure before stacking.
• No more than four VTs should be stacked together.
1
2
3
4