64
VTX A8 | Rigging Manual
13 - THE VTX A8 MINI FRAME
The VTX A8 MF Mini Frame is a lightweight, compact and inexpensive array frame used for suspending smaller VTX A8 and VTX B18
arrays. The three-piece design is comprised of two side arms and one spreader bar. The side arms connect to the cabinets, and the
spreader bar can be pinned to one of the 22 pick-point positions, providing excellent tilt resolution. The Mini Frame was designed to
work primarily in single-point applications, although dual-point is supported by using the two spreader bar side shackle positions. The
Mini Frame can be used in conjunction with the VTX RC500 rotating clamp, allowing smaller A8/B18 arrays to be suspended from stan-
dard sized trusses or pipes. The three pieces can be collapsed and pinned together for storage.
13.1 MINI FRAME OVERVIEW
CABINET CONNECTION
POINT
SPREADER BAR
SPREADER BAR (R)
PIN POSITIONS
CENTER SHACKLE
POSITION
SIDE SHACKLE
POSITION
SPREADER BAR (L)
PIN POSITIONS
TIP: The Mini Frame is compatible with ½-inch shackles. Two, high-quality, black ½-inch shackles are included with every
Mini Frame. Always use high-quality shackles from reputable sources.
To Next Page
Loading...
Need help?
General
