20
VTX A8 | Rigging Manual
7 - A8 TRANSPORTATION
The VTX A8 VT Vertical Transporter carries four VTX A8 cabinets for travel. All four cabinets should be set to the 10-degree (STORAGE)
position when stacked on the VTX A8 VT to secure the rigging for transportation. The optional VTX A8 VT CVR cover can be used for
additional protection.
7.1 INSTALLING VTX A8 CABINETS ON A VT
VTX A8 cabinets should be installed on a VTX A8 VT one by one, starting with the lowest cabinets in the array.
STEPS:
• Use the four front and rear A8 quick release pins to secure the first VTX A8 cabinet to the VTX A8 VT.
• Select the 10-degree (STORAGE) position for the cabinet and set the red locking lever to the locked position.
1°
2.5° 3° 4° 6° 8°
10°STORAGE
2° 1.5° 25°
1
2
1
2
1
To Next Page
Loading...
Need help?
General
