VTX A8 | Rigging Manual
8.4 Extension Bar Attachment Options ......................................................................32
8.5 Extension Bar Storage Positions ........................................................................33
8.6 Extension Bar Positioning .............................................................................34
8.7 Using Dual Extension Bars .............................................................................35
8.8 Installing the Laser Bracket ............................................................................36
8.9 Extension Bar Use Cases ..............................................................................37
8.10 Attaching the Array Frame ............................................................................38
9 - DEPLOYING STANDALONE A8 SYSTEMS ...................................................................39
9.1 Preselect the Angles .................................................................................39
9.2 Pre-Locking the Angles (Optional Step) ..................................................................40
9.3 Suspend the First Stack ...............................................................................41
9.4 Attach the Next Stack ................................................................................42
9.5 Repeat Until Completed ...............................................................................45
10 - DISASSEMBLING AN A8 ARRAY ..........................................................................46
10.1 Open the Angle Locks and Attach the VT ................................................................46
10.2 Close the Angle Locks and Move Pins to Storage ..........................................................47
10.3 Repeat Steps to Disconnect the Next Four Cabinets .......................................................48
10.4 Repeat Steps to Disassemble the Array .................................................................49
11 - MIXED ARRAYS WITH A8 AND B18 ........................................................................50
11.1 Attaching the Array Frame to the B18 ..................................................................................50
11.2 Attaching A8 to B18 ................................................................................52
11.3 De-Rigging the Array ...................................................................................................55
11.4 Mixed Array Safety Note ...............................................................................................55
12 - THE VTX A8 SUSPENSION BAR ..........................................................................56
12.1 VTX A8 SB Suspension Bar Overview ..................................................................................56
12.2 VTX A8 SB Suspension Bar Attachment Tabs ...........................................................................57
12.3 VTX A8 SB for Pull-Back ............................................................................58
12.4 Using Two A8 Suspension Bars ........................................................................59
12.5 When to Use a Pull-Back .............................................................................60
12.6 Using a Single VTX A8 SB ............................................................................61
12.7 Suspension Bar and Mixed Arrays ......................................................................63
13 - THE VTX A8 MINI FRAME ................................................................................64
13.1 Mini Frame Overview ................................................................................64
13.2 Mini Frame Storage Configuration ......................................................................65
13.3 Attaching the Mini Frame to A8 ........................................................................66
13.4 Mini Frame Suspension Options .......................................................................67