'L' Blades - 25 mm (1 in) cut - replacement blades for
cut-out knife (above).
JCB part number - 992/12801 (unit quantity = 5 off)
Glass Lifter - minimum 2 off - essential for glass
installation, 2 required to handle large panes of glass.
Ensure suction cups are protected from damage
during storage.
JCB part number - 892/00842
240V Static Oven - available with 2 or 6 cartridge
capacity - required to pre-heat adhesive prior to use.
No plug supplied. Note: 110V models available upon
request - contact JCB Technical Service.
JCB part number:
992/12400 - 2 Cartridge x 240V
992/12600 - 6 Cartridge x 240V
Wire Starter - used to
access braided cutting wire
(below) through original
polyurethane seal.
JCB part number - 892/00848
Service Tools (cont'd)
Section B - Body & Framework
4 - 2
Section 1 General Information
9803/3280
Section 1
4 - 2
Issue 1
S186300
S186260
Cut-Out Knife - used to
remove broken glass.
JCB part number - 992/12800
Glass Extractor (Handles) - used with braided cutting
wire (below) to cut out broken glass.
JCB part number - 892/00846
S186320
S186350
S186310
S186340
To Next Page
Need help?
General
