9 - 1
You must grease the machine regularly to keep it working
efficiently. Regular greasing will also lengthen the machine's
working life.
The machine must always be greased after pressure
washing or steam cleaning.
! WARNING
You will be working close into the machine for these
jobs. Lower the attachments if possible. Remove the
starter key and disconnect the battery. This will prevent
the engine being started. Make sure the parking brake is
engaged.
Chock all four wheels before getting under the machine.
2-3-2-1
Greasing should be done with a grease gun. Normally, two
strokes of the gun should be sufficient. Stop greasing when
fresh grease appears at the joint.
In the following illustrations, the grease points are
numbered. Count off the grease points as you grease each
one. Refit the dust caps after greasing.
Loader Arms
For each grease point shown, there is another on the other
side of the machine.
Total 22 grease points.
Section 3 Routine Maintenance
9803/3280
Section 3
9 - 1
Issue 1
Greasing
S260190
1
2
43
5
6
87
9
0
@
!
£
$
^
%
&
*
(
)
⁄
¤
To Next Page
Loading...
Need help?
General
