JUKI DNU-1541 - Machine Head Wiring (with Thread Trimmer Only); Connector Coming from the Machine Head

− 46 −
10. MACHINE HEAD WIRING (WITH THREAD TRIMMER ONLY)
(1) Connector coming from the machine head
™ 12-pin connector ™ 6-pin connector
™ 14-pin connector
™ 15-pin connector (DL type only) ™ 9-pin connector (DL type only)
Name of part Pin No. Remarks
DL control switch 1 G N D
(Green and Black)
DL control switch 2 SW1(White)
DL control switch 5 SW2(Red)
Name of part Pin No. Remarks
Synchronizer 1 SGND(Black)
Synchronizer 4 UDET(White)
Synchronizer 5 DDET(Green)
Synchronizer 6 +5V(Red)
Name of part Pin No. Remarks
5-string switch 1 BTSW(Brown)
5-string switch 2 GND (Red)
5-string switch 3 Needle UP (Orange)
5-string switch 4 BT cancel (Yellow)
5-string switch 5 DL (Pink)
5-string switch 6 DL (–) (Gray)
5-string switch 10 DL (LED 24V)
(White)
5-string switch 13 No function
5-string switch 14 No function
Pin No.
1 Thread trimmer (–) (Black)
2
3
4
5 BT switch (Black)
6 BT (–) (Black)
7 Tension release (–) (White)
8 Thread trimmer (+) (White)
9
10 Earth (Green/Yellow)
11
12 GND (White)
13 BT (+) (White)
14 Tension release (+) (White)
Name of part Pin No. Remarks
5-string switch 1 DL (+) (Brown)
5-string switch 2 BT (–) (Red)
5-string switch 3 BT (+) (Orange)
5-string switch 4 DL (–) (Yellow)
5-string switch 5 FL (+) (Pink)
5-string switch 6 FL (–) (Gray)
5-string switch 7 2P (–) (White)
5-string switch 8 2P (24V) (Black)
5-string switch 9