A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P109
[Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P110
[Audio Set Item] )
Video Set Item
Display On TV
For
setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out K
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
9
Resolution K
For
selecting the resolution of video output from the
[HDMI] terminal or [SDI OUT] terminal according to
the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]
Memo :
0
The selectable options vary according to the
setting
in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
This item cannot be specified when HDMI/SDI
Out is set to “Off”.
9
HDMI Color K
0
For setting the color format of HDMI signals.
0
This item is selectable when
[HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, RAuto]
9
HDMI Enhance K
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On
”.
0
This item is selectable when
[HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, ROff]
9
SDI Rec Trigger K
For
setting whether to superimpose trigger signals
in tandem with the [SDI OUT] terminal as well as
the [REC] button on the camera body.
If “On” is specified, it is possible to record on a
device equipped with SDI record trigger in tandem
with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The SDI record trigger output status to the
connected device is indicated by REC B/STBY B
on the display screen.
[Setting Values: On, ROff]
Memo :
0
Even if REC B/STBYB is displayed on the
display screen, the compatible device may not
necessarily be recording.
HDMI Out M
For setting whether to output the HDMI signal.
[Setting Values: On, ROff]
9
Resolution M
For
selecting the resolution of video output from the
[HDMI] terminal according to the monitor to be
connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 2160/24p, 2160/25p, 2160/30p]
Memo :
0
The selectable options vary according to the
setting
in [System]/[WResolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
9
HDMI Color M
0
For setting the color format of HDMI signals.
0
This item is selectable when
[HDMI Out] is set
to “On”.
[Setting Values: RGB, RAuto]
9
HDMI Enhance M
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On
”.
0
This item is selectable when
[HDMI Out] is set
to “On”.
[Setting Values: On, ROff]
A/V Set Menu
109
Menu Display and Detailed Settings
To Next Page
Loading...
Need help?
General
