JVC GY-HM200U User Manual

LCD Monitor
.
G
F
E
H
I
J
D
B
A
C
L KM
A
LCD Monitor
(A P
37 [Adjusting the LCD Monitor and
Viewfinder] )
B
[CANCEL/STOP] Cancel Button
Cancels various settings and stops playback.
C
LCD Cross-Shaped Button (JKHI)/Set Button
(R)
0
The function changes according to the
operation status of the camera recorder.
0
During menu operation (all modes)
(A P92
[Basic Operations in Menu
Screen] )
0
During Camera mode
0
You can use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P39 [Assignment of Functions to User
Buttons] )
D
[MENU/THUMB] Menu/Thumbnail Button
0
Displays the menu screen during Camera
mode.
0
Switches between [Main Menu
] and
[Favorites Menu] when the [MENU/THUMB]
button is pressed and held down while the
menu screen is displayed.
(A P
92 [Basic Operations in Menu
Screen] )
0
Displays
the menu screen when the button is
pressed during thumbnail display in the
Media mode.
0
Stops playback and displays the thumbnail
screen when the button is pressed during
playback screen display in the Media mode.
E
[LOLUX/3] Low-light Shooting/User 3 Button
0
For switching the low-light shooting mode
ON or OFF.
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button.
(A P39
[Assignment of Functions to User
Buttons] )
F
[
C.REVIEW/4] Clip Review/User 4 Button
0
For checking the most recently captured
images.
(A P
73 [Viewing Recorded Videos
Immediately (Clip Review)] )
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button.
(A P39 [Assignment of Functions to User
Buttons] )
G
[ZEBRA/5] Zebra/User 5 Button
(A P72 [Setting Zebra Pattern] )
You can also use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P39 [Assignment of Functions to User
Buttons] )
H
[DISPLAY] Display Button
0
Press the
[DISPLAY] button to switch to the
display screen during normal screen display
(when the menu screen is not displayed).
(A P
35 [Display Screen] )
0
Switches between [Main Menu] and
[Favorites Menu] when the [DISPLAY] button
is pressed while the menu screen is
displayed.
(A
P92 [Basic Operations in Menu
Screen] )
I
[STATUS] Status Screen Display Button
Press the [STATUS] button to display the status
screen on the viewfinder and LCD monitor
during normal screen display (when the menu
screen is not displayed).
(A P36 [Status Screen] )
J
Monitor Speaker
(A P86 [Audio Output during Playback] )
K
SD Card Slot
(A P41 [Inserting an SD Card] )
L
Card Slot A/B Status Indicator
M
[SLOT SEL] Card Slot Selection Button
For switching the active card slot during
shooting and playback.
Names of Parts
23
Introduction

JVC GY-HM200U Specifications

General

Brand	JVC
Model	GY-HM200U
Category	Camcorder
Language	English