JVC GY-HM200U User Manual

Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P112
[ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When “On
” is selected, set the Level.
[Setting Values: ROn, Off]
9
Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
0
The icon changes according to the level set.
(A P128 [Image Stabilizer Mark] )
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Shutter
For specifying shutter-related settings.
Set to “Step”
(fixed value) or “Variable” when
operating with the J / K volume buttons on the side
of the camera recorder.
0
Variable:
Sets to variable scan. Use this setting when
shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Speed
For
setting the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AGC Limit
For setting the maximum gain value of
“AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, R18dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F4, F2.8, RF2, F1.8, F1.6, F1.4,
F1.2]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, F8, RF5.6, F4]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [
GAIN] or [WHT.BAL B/A/PRST] switch.
[Setting Values: ROff, Slow, Middle, Fast]
Memo :
0
This
function is disabled when AGC is operating.
96
Camera Function Menu
Menu Display and Detailed Settings

JVC GY-HM200U Specifications

General

Brand	JVC
Model	GY-HM200U
Category	Camcorder
Language	English