A P S
Languag e
Co u n t r y
Channel S e a r c h
English
Fr a n ce
ALL
Move Select
A P S
Languag e
Co u n t r y
Channel S e a r c h
English
Fr a n ce
ALL
Digi t a l C h a n n e l Fo u n d 90
Analog C h a n n e l Fou n d 25
Scan Pr o gress(AT V ) 80%
Stop
English-22
When you turn on your TV for the rst time after purchase or perform the default
setting, the initial setup wizard(APS) will appear automatically. You can easily
setup the available analog and digital channels using the wizard.
1 Select the language of your choice using the ◄/► button. The On Screen
Display (OSD) menu will be shown in the selected language.
2 Select Country using the ▲/▼ button.
3 Select the country where you are now located using the ◄/► button.
4 Select Channel Search using the ▲/▼ button.
5 Select one option among ALL, DTV, ATV using the ◄/► button and press
the OK button. It starts to scan channels. First scans analog and then digital
channels.The scanned channels are automatically saved in order. To stop
scanning channels, press the BACK button.
6 After the channel scanning completes, the Channel list is displayed
automatically. The rst scanned digital channel, if only, will be automatically
displayed.
Note: If you do not want to setup the channels at this time, you can setup it later
using the Installation menu.
Running Initial Setup Wizard
Chapter 3 >> Initial Setup Wizard
To Next Page
Loading...
Need help?
General
