Main Power switch
on Rear Panel
STANDBY button
on Top Panel
STANDBY button
on Remote Control
English-23
To turn on your TV, do as follows:
1 Connect the power cord on TV to the wall outlet.
2 Press the MAIN POWER switch on the rear of your TV. The standby
indicator lights up.
3 Press the STANDBY button on your remote control (or on the top of your
TV) to turn on the TV.
Note: To set your TV in standby mode, press the STANDBY button again on the
remote control or ( ) on the top of your TV. It saves the electric usage when
you want to stop watching TV temporarily (during a meal, for example).
4 To turn off the TV, press the MAIN POWER switch on the rear of your TV.
Note: Do not leave your TV in standby mode for too long (on holiday, for
example). Turn off the TV by pressing the MAIN POWER switch on the rear of
your TV. It is recommended for you to turn off the power by disconnecting the
power cord.
Turning on Your TV
You can select the language for displaying menus and indications.
1 Press the MENU button.
2 Select Feature using the ▲/▼ button and press the OK or ► button.
3 Select the language of your choice using the ◄/► button.
The On Screen Display (OSD) menu will be shown in the selected language.
4 Press the MENU button to return to Live TV or press the BACK button to
return to the previous menu.
Selecting the Menu Language
Chapter 4 >> Basic Operation
English
> F e a t u r e
Languag e
Ti m e S e t t i n g
Pa rental Co n t r ol
OSD Transpare n c y
Blue Ba c k
PIP
CI
DT V Setup
Default S etti n g
English
30
Off
Move
Select
To Next Page
Loading...
Need help?
General
