JVC SR-VS20E User Manual

1-13
1.11 EMERGENCY DISPLAY FUNCTION
This unit has a function for storing the history of the past two
emergencies (EMG) and displaying them on each FDP. With
the status of the VCR and mechanism at the moment an emer-
gency occurred can also be confirmed.
Notes:
•
The emergency detail display 1 2 show the information
on the latest emergency.
It becomes “ – – : – – : – –” when there is no latest emer-
gency record.
• When using the Jig RCU, set its custom code to match
the custom code of the VCR.
FDP display 0 : 00 : 00
Emergency detail display
2
Emergency detail display
1
Emergency content display
(E:Latest:Previous)
Normal display
*
1:
*
2 : 34
E:
**
:
**
*
5:
*
6 :
*
7
Fig. 1-11-1 Jig RCU [PTU94023B]
Note:
[DV]
For the emergency content, see “1.11.3 Emergency con-
tent description”.
[VHS]
For the emergency content, see “1.11.3 Emergency con-
tent description”.
(2) Transmit the code “59” from the Jig RCU again.
The FDP shows the emergency detail information 1 in the
form of “
*
1 :
*
2 : 34”.
*
1 : Deck operation mode at the moment of emergency
*
2 : Mechanism operation mode at the moment of emer-
gency
3 – : Mechanism sensor information at the moment of
emergency
– 4 : Mechanism mode position at the moment of emer-
gency
Note:
•
For the emergency detail information 1 , see “1.11.4
Emergency detail information
1 ”.
(3) Transmit the code “59” from the Jig RCU once again.
The FDP shows the emergency detail information 2 in the
form of “
*
5 :
*
6 :
*
7 ”.
*
5 : Type of the cassette tape in use 1 .
*
6 : Winding position of the cassette tape in use
*
7 : Type of the cassette tape in use 2 (Winding area)
Note:
•
For the emergency detail information 2 , see “1.11.5 Emer-
gency detail information
2 ”.
(4) Transmit the code “59” from the Jig RCU once again to re-
set the display.
1.11.2 Clearing the emergency history
(1) Display the emergency history.
(2) Transmit the code “36” from the Jig RCU.
(3) Reset the emergency display.
Example 1 E : 01 : 03
Previous emergency
Latest emergency
No emergency record
Example 2 E : –– :
––
1.11.1 Displaying the emergency information
(1) Transmit the code “59” from the Jig RCU.
The FDP shows the emergency content in the form of
“E:
**
:
**
”.
INITIAL MODE
DATA CODE
CUSTOM CODE
43: A CODE
53: B CODE
[Data transmitting method]
Depress the “ ” ( 3 ) button
after the data code is set.
Jig RCU
(Y292-03e)
FDP display switching
[DV]
[VHS]
FDP display – : –– : –– Normal display
E :
**
:
**
Emergency content display
(E:Latest:Previous)
E :
**
:
**
Emergency content display
(E:Latest:Previous)

JVC SR-VS20E Specifications

General

Brand	JVC
Model	SR-VS20E
Category	VCR
Language	English