57
Programming Menu
When adjusting a parameter, press “ENTER” to access Edit Mode.
Parameter values can only be changed in Edit Mode.
• Up/Down - Can be used to increment or decrement the number. Press
the ENTER key to save the change.
• F4 Hotkey (NUM) - Pressing the F4 key in Edit
Mode allows a user to adjust each placeholder
value. The other Hotkeys change the placeholder
or add a decimal point. Press “ENTER” to save the
changes.
• >> : Used to move placeholder for adjustment.
• . : Inserts decimal point.
• <- : Used as a backspace to move placeholder
for adjustment
• + - : Used to change the sign of the value.
An example of using the NUM function to change a parameter is
shown below:
Enter
F4
F4
F3
Num
>>
.
The NUM function can be useful for selecting parameter options from a list
using its assigned value as opposed to scrolling through the text descrip-
tions. Most parameters with a large list option will have a corresponding
NUM column listed in the parameter description of the manual for quick and
easy adjustment.
The NUM function can also be very quick and useful for adjusting large
numbers as opposed to scrolling.
With parameters that allow multiple items to be selected together, the
NUM value would correspond to the sum of the individual selections.
3.6.1. Parameter
Adjustment
F4
To Next Page
Loading...
Need help?
General