22
PRODUCT DESCRIPTION
2.1 Specied application
TheCOMBIVERTH6isaDC-coupleddrivesystemforthecontrolofdierentaxes.It
serves exclusively for the control and regulation of three-phase motors. It is intended for
the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the name-
plate and the instructions for use and must be strictly observed.
The used semiconductors and components of the KEB Automation KG are developed
and dimensioned for the use in industrial products.
RESTRICTION
If the KEB COMBIVERT F5 is used in machines, which work under exceptional condi-
tions or if essential functions, life-supporting measures or an extraordinary safety step
mustbefullled,thenecessaryreliabilityandsecuritymustbeensuredbythemachine
builder.
Residual risks
Despite intended use, drive converters can reach unexpected operating conditions in
case of error, with wrong parameterization, by faulty connection or unprofessional inter-
ventions and repairs. This can be:
• wrong direction of rotation
• motor speed too high
• motor is running into limitation
• motor can be under voltage even in standstill
• automatic start
2.2 Unintended use
The operation of other electric consumers is prohibited and can lead to the destruction of
the unit. The operation of our products outside the indicated limit values of the technical
data leads to the loss of any liability claims.
To Next Page
Loading...
Need help?
General
