KEB COMBIVERT R6-N User Manual

Fundamentals
© KEB, 2015-07 COMBIVERT R6-N Page2.1 - 3
2
10
Each parameter is
well-specied
2. Operation
Thefundamentalsofthesoftwareconguration,aswellastheoperationoftheunitaredescribedinthepresent
chapter.
2.1 Fundamentals
ThecontrolboardsR6containthefollowingoperationmodes:
Operation modes of the
Control board
Customer mode Application mode
- isafreelydenablelistof parameters(CP-Pa-
rameters), which are necessary or important for
the end user
- deliveredconditionwithaparameterlistdened
by KEB
- all parameters, parameter groups  (exception:
CP-Parameters) and parameter sets can be se-
lected and changed if necessary
- is generally activated only for application adaption
2.1.1 Parameter, parameter groups, parameter sets
What are parameters, parameter groups and parameter sets?
Parametersarevalueschangeablebytheuserinaprogram,whichaffecttheprogramow.Aparametercon-
sists of
Parameter designation Parameter value
The parameter value indicates the actual adjustment.
The parameter number determines the parameter within
a group.
All parameters are listed function-related in parameter
groups in order that the operation remains clear despite
of the multitude of parameters.
There are 8 parameter sets (0...7) in order to preset sev-
eral values for a parameter.If the respective active values
shall be indicated during operation, set the digit to „A “.
The digit is not applicable at set-programmable parame-
ters.

KEB COMBIVERT R6-N Specifications

General

Brand	KEB
Model	COMBIVERT R6-N
Category	Inverter
Language	English