KEB COMBIVERT R6-N User Manual

Page2.1 - 4 COMBIVERT R6-N © KEB, 2015-07
Fundamentals
2.1.2 Selection of a parameter
Theashingpointdisplaysthechangeabledigit.TheashingpointisshiftedbypressingtheENTERkey.
▲
▼
▲
▼
▲
▼
START
STOP
ENTER
START START
STOP
STOP
ENTER
F/R F/R
Parameter number
select
Parameter number
select
Parameter number
select
For non-programmable parameters (see 4.1.5)
a parameter set number is not displayed
Changes between parameter value
FUNC
SPEED
and parameter designation.
2.1.3 Adjustment of parameter value
Changing of
standard parameters ENTER parameters
- values are
immediate-
ly accepted
and stored
non-volatile
- a point behind the last
digit is displayed during
changing
- the value is accepted
and stored non-volatile by
pressing ENTER.
▲
▼
▲
▼
▲
▼
▲
▼
START
START
START
START
STOP STOP
STOP
STOP
ENTER
F/R
The parameter values can only be changed, if the parameter set is not adjusted to „active parameter
set“ (A)! (see 4.1.6)
2.1.4 ENTER-Parameter

KEB COMBIVERT R6-N Specifications

General

Brand	KEB
Model	COMBIVERT R6-N
Category	Inverter
Language	English