Keithley 2110 User Manual

Model 211
0 5½ Digit Multimeter Reference Manual Section 5:
Remote commands
2110-901-01 Rev. C/August 2013 5-55
[SENSe:]TEMPerature:RTD:TYPE <name>
Use this command to select the RTD sensor type for temperature measurement with RTD.
Parameters
<name> description
PT100
Select RTD type PT100.
D100
Select RTD type D100.
F100
Select RTD type F100.
PT385
Select RTD type PT385.
PT3916
Select RTD type PT3916.
USER
Select RTD type USER.
SPRTD
Select RTD type SPRTD.
NTCT
Select RTD type NTCT.
Query
command description
[SENSe:]TEMPerature:RTD:TYPE?
Query the RTD type for temperature measurement with RTD.
Details
Refer to Thermocouple measurements (on page 3-22) and RTD coefficients and temperature calculation (on
page 3-19) for information about RTD coefficients.
[SENSe:]TEMPerature:RTD:RZERo <n>|MIN|MAX
Use this command to set the R-Zero coefficient at 0 degrees Celsius for the user-defined RTD type.
Parameters
<n> description
10 to 1000
Select the R-Zero coefficient at 0 degrees Celsius.
MINimum
Select the minimum coefficient.
MAXimum
Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:RTD:RZERo?
Query the R-Zero coefficient at 0 degrees Celsius
for the user-defined RTD type.
[SENSe:]TEMPerature:RTD:RZERo? MIN
Query the minimum R-Zero coefficient at 0 degrees
Celsius for the user-defined RTD type.
[SENSe:]TEMPerature:RTD:RZERo? MAX
Query the maximum R-Zero coefficient at 0 degrees
Celsius for the user-defined RTD type.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
RTD type: RTD coefficients and temperature calculation (on page 3-19).

Keithley 2110 Specifications

General

Brand	Keithley
Model	2110
Category	Multimeter
Language	English