3: Basic DMM operation Model 2110 5½ Digit Multimeter
3-26 2110-901-01 Rev. C/August 2013
Secondary measurement function
The instrument provides dual measurement capability. When you enable the secondary
measurement function, or second function (2ND), you make two measurements at the same time
(series measurements). In the following table, the symbol (•) indicates which secondary
measurement functions are available for each primary measurement functIon and the
symbol
indicates capacitance. Diode and continuity testing are not available as a secondary function.
function
DCV ACV DCI ACI
Ω2/Ω4
FREQ
(VOLT)
FREQ
(CURR)
PERIOD
(VOLT)
PERIOD
(CURR)
TEMP
(RTD)
TCOUPL
• •
•
•
•
•
•
•
•
•
• •
•
• • • •
•
•
•
•
•
Ω2/Ω4
•
• • •
•
•
• •
•
•
• • •
•
•
• •
•
•
•
TEMP (RTD)
•
TCOUPL
• • • • • • • • • • •
To Next Page
Loading...
Need help?
General
