43
4
4
Features of your vehicle Power liftgate
僅 In cold and wet climates, the outside
power liftgate open/close button may
not work properly due to freezing
conditions. If this occurs, remove the
ice before using the outside power
liftgate open/close button or use the
power liftgate open/close button on
the smart key or the instrument panel.
僅 Operating the power liftgate more
than 5 times continuously could cause
damage to the operating motor. If this
occurs, the power liftgate will not
operate to prevent the motor from
overheating. If any of the power lift
-
gate buttons are pressed to try to
open the liftgate, the chime will sound
3 times, but the liftgate will remain
closed. Allow the power liftgate sys
-
tem to cool for about 1 minute before
operating the system again.
Operating the power liftgate
Power liftgate open/close button
(Smart key, Instrument panel)
Press the power liftgate open/close but
-
ton for 1 second. The liftgate opens or
closes with a warning sound.
While the liftgate is opening or closing,
press the button to stop liftgate opera
-
tion.
If the smart key is not within operation
range (approximately 10 m) from the
vehicle, liftgate operation will stop with a
warning sound for 5 seconds.
When the liftgate is closed, press the
power liftgate open/close button for 1
second. The power liftgate opens with a
warning sound.
While the liftgate is opening, press the
button to stop liftgate operation.
When the power liftgate is opened, press
and hold the power liftgate open/close
button to close the liftgate. If you release
the button while the liftgate is closing,
power liftgate operation will stop with a
warning sound for 5 seconds.
Also, if the smart key is not within opera
-
tion range (approximately 10 m) from
the vehicle, power liftgate operation will
stop with a warning sound for 5 sec
-
onds.
To Next Page
Loading...
Need help?
General
