45
4
4
Features of your vehicle Power liftgate
matic reverse feature operates. Serious
injury, or damage to the vehicle or object
may occur.
The power liftgate may stop operating if
the automatic reverse feature operates
more than two times while attempting to
open or close the liftgate. If this occurs,
carefully open or close the liftgate man
-
ually, and then after 30 seconds try to
operate the power liftgate automatically
again.
Setting the power liftgate
To use each feature, you must select the
opening speed or opening height from
the settings menu. Deselect the settings
when you do not want to use the fea
-
ture.
Power liftgate opening speed
To adjust the power liftgate speed,
select 'User Settings → Door/Liftgate →
Power liftgate Opening Speed → Fast/
Slow' in the instrument cluster or 'Setup
→ Vehicle Settings → Door/Liftgate →
Power liftgate Opening Speed → Fast/
Slow' in the infotainment system.
(Default setting is 'Fast')
Power liftgate opening height (if
equipped)
To adjust the power liftgate opening
height, select 'User Settings → Door/Lift
-
gate → Power liftgate Opening Height →
Full Open/Level 3/Level 2/Level 1/User
Height Setting' in the instrument cluster
or 'Setup → Vehicle Settings → Door/
Liftgate → Power liftgate Opening
Height → Full Open/Level 3/Level 2/
Level 1/User Height Setting' in the info
-
tainment system.
See additional information in supplied
Infotainment Manual.
User height setting
1. Position the liftgate manually to the
height you prefer.
2. Press the power liftgate open/close
button located inside the liftgate for
more than 3 seconds.
If 'User Height Setting' is selected for
the power liftgate opening height, the
power liftgate will automatically open
to the height manually set by you.
僅 If the power liftgate opening height
has not been manually set, the power
liftgate will fully open when 'User
Height Setting' from the infotainment
system is selected.
僅 If one of the height setting (Full Open/
Level 3/Level 2/Level 1) is selected
from the settings menu in the info
-
tainment system, and then 'User
Height Setting' is selected, the liftgate
will open to the height manually set
by you.
僅 The power liftgate opening speed and
opening height settings change
according to the linked User Profile. If
the User Profile is changed, power lift
-
gate opening speed and opening
height settings will change accord
-
ingly.
Resetting the power liftgate
In some circumstances resetting the
power liftgate operation may need to be
performed. Some instances where reset
-
ting the power liftgate may be required
include:
僅 When the 12-volt battery is recharged
To Next Page
Loading...
Need help?
General
