Maintenance
568
Light bulbs
Type B
If the headlamp LED (1,2), daytime run
-
ning lamp LED (3), turn signal lamp LED
(4) and front side marker (5) does not
operate, have your vehicle checked by a
professional workshop. Contact and visit
an authorized Kia dealer.
Replacing front turn signal lamp
(Bulb type)
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Remove the socket from the assembly
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the assembly.
3. Remove the bulb from the socket by
pressing it in and rotating it counter
-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
6. Connect the negative terminal from
the battery.
Replacing front fog lamp (LED
type)
If the front fog lamp (1) does not oper
-
ate, have your vehicle checked by a pro
-
fessional workshop. Contact and visit an
authorized Kia dealer.
To Next Page
Loading...
Need help?
General
