13
3
3
Safety features of your vehicle Seat
3. Release the switch once it reaches the
desired position.
Passenger walk-in switch (if
equipped)
The rear seat passenger may use the
switches to control the front passenger
seat.
Sliding forward or rearward:
僅 To move the front passenger seat for
-
ward, press the switch (1). To move
the front passenger seat rearward,
press the switch (2).
Angle adjustment:
僅 To recline the front passenger seat
-
back forward, press the switch (3). To
recline the front passenger seatback
rearward, press the switch (4).
Headrest (for front seat)
The driver's and front passenger's seats
are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort
for the driver and front passenger, but
also helps protect the head and neck in
the event of a collision.
To maximize the effectiveness in case of
accidents, the headrest should be
adjusted so the middle of the headrest is
as high as the center of gravity of an
occupant's head. Generally, the center of
gravity of most people's heads is similar
with the height as the top of their eyes.
Also, adjust the headrest as close to your
head as possible. For this reason, the use
of a cushion that holds the body away
from the seatback is not recommended.
Headrest removal/adjustment
僅 Do not operate the vehicle with the
headrests removed. Headrests can
provide critical neck and head sup
-
port in a crash.
僅 Do not adjust the headrest height
while the vehicle is in motion. Driver
may lose control of the vehicle.
To Next Page
Loading...
Need help?
General
