71
6
6
Driver assistance system Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor
(BVM) (if equipped)
Left side
Right side
Blind-Spot View Monitor is a function
that helps the driver safe driving by
using the camera installed in the vehicle
and displaying the rear blind spot area
of the vehicle in the cluster when the
turn signal is turned on.
Detecting sensor
Wide-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Blind-Spot View Monitor settings
Blind-Spot View
僅 With the engine on, select 'Driver
Assistance → Blind-Spot Safety →
Blind-Spot View' from the Settings
menu to turn on Blind-Spot View
Monitor and deselect to turn off the
function.
To Next Page
Loading...
Need help?
General
