Kohler MPAC 1500 User Manual

TP-6714 4/10 91Section 5 Setup
5.16 Communications
Use the communications setup screen to set the
communication parameters for serial or ethernet
connections. See Section 6, Communications, for
instructions.
5.17 Set Passwords
Two passwords control access to the Test and Setup
screens. Passwords are 4-digit numerical values
ranging from 0000 to 9999. The default passwords are
set to 0000. Change the passwords to prevent
unauthorized access to the Test initiation screens and
system settings.
Note: A DIP switch on the controller’s main logic board
allows the setup password to be disabled. The
DIP switch does not disable the test password.
Setup Password
BY"Back
Back Save
Old Password ?
???
New Password ????
Set Passwords
BY"Main
Incorrect Password
Test Password
BY"Back
Back Save
Old Password ?
???
New Password ????
Incorrect Password
Figure 5-29 Setting/Changing Passwords

Kohler MPAC 1500 Specifications

General

Brand	Kohler
Model	MPAC 1500
Category	Controller
Language	English