3)
After approximately 2 seconds, the screen will change
to the preset (speed range to start) display screen.
Then, it will switch to the standard screen.
• Engine coolant temperature caution lamp (9)
• Engine coolant temperature gauge (10)
• Power train oil temperature caution lamp (11)
• Power train oil temperature gauge (12)
• Hydraulic oil temperature caution lamp (13)
• Hydraulic oil temperature gauge (14)
• Fuel level caution lamp (15)
• Fuel gauge (16)
• Speed range display section (17)
• Multi-gauge (18)
• DEF level caution lamp (19)
• DEF level gauge (20)
4)
If the multi-gauge goes out and caution lamp stays lit,
immediately check the lit item.
For details of contents and check methods for caution
lamp, see “WARNING DISPLAY (3-13)”.
11.
If the maintenance time has passed for certain items,
maintenance time caution lamp (21) is lit for 30 seconds.
Press switch F6 (22) to check the item, and perform main-
tenance immediately.
For details of the method of checking the maintenance in-
terval, see EXPLANATION OF COMPONENTS, “MAINTE-
NANCE SCREEN SETTING (3-78)”.
METHOD FOR STARTING ENGINE
METHOD FOR STARTING ENGINE IN NORMAL WEATHER
WARNING
• Start the engine only while sitting down in the operator's seat.
• Do not attempt to start the engine by short-circuiting the engine starting circuit. Doing so may
cause a fire or serious personal injury or death.
• Check that there are no people or obstacles in the surrounding area, then sound the horn and start
the engine.
• Never use starting aid fluids as they may cause explosions.
• Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure
good ventilation.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-167
To Next Page
Loading...
Need help?
General
