11. Caution before moving in reverse
12. Caution for operation, inspection and maintenance
13. Caution for blast jobsite
14. Caution for not getting on fuel tank
15. Caution for handling cable
16. Caution against high-pressure fuel
17. Prohibition of start by short-circuiting
18. Caution for handling DEF
19. Caution for high-temperature hydraulic oil
20. Caution of fuel filter
CONTENTS OF SAFETY LABELS
(1) Caution for high-temperature coolant
“09653-A0481”
• Never remove the cap when the engine is at operating
(high) temperature. Steam or high temperature oil blowing
up from the radiator or hydraulic tank, will cause personal
injury and/or burns.
• Never remove the radiator cap or hydraulic tank oil filter
when cooling water or hydraulic oil is at high temperatures.
(2) Caution for not getting on engine hood
“09805-C0481”
• Sign indicates a hazard of falling.
• Do not stand on this place here.
(3) Caution for handling ROPS/FOPS
“09620-A2001, 09620-A3001”
• If some modification is applied to the ROPS or FOPS, it
may effect the strength and may not comply with the
standard. Do not drill, cut or weld on the ROPS or FOPS
structure. Any modification is prohibited.
• ROPS or FOPS may provide less protection if it has been
structurally damaged or involved roll-over. Consult Komat-
su Distributor in that case.
• Always wear seat belt when moving.
SAFETY LABELS SAFETY
2-6
To Next Page
Loading...
Need help?
General
