• Apply the brake sharply during travel at high idle.
• Operate the brake while the engine is running at high idle in the 1st speed range (F1 or R1). (Machine is
stalled)
DO NOT OPEN DOOR WHILE OPERATING MACHINE
Always keep the door closed when traveling or performing operations.
If the door is open, it may be damaged by obstacles or strong vibration.
DO NOT MODIFY CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE
VIEW
Never install anything which obstructs the view and affects the safety to the glass.
Keep the glass clean and secure the safety for the work.
PRECAUTIONS FOR FLOATING OPERATION
If the blade is operated to FLOAT when the engine is running at low speed or when it is idling, hunting may
occur.
Raise the engine speed when performing FLOAT operation.
PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB AND ROPS STRUC-
TURES
WARNING
The cab stays create blind spots.
When operating, check carefully that there is no person or
obstacle in the surrounding area.
RECOMMENDED APPLICATIONS
In addition to the following, it is possible to further increase the range of applications by using various attach-
ments.
DOZING WORK
Cut soil and sand and move them forward. When cutting a
slope surface, it is more efficient to always cut from top toward
bottom.
Do not apply excessive load which causes shoes continuously
slip.
Do not perform steering operation when heavy load is applied.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-190
To Next Page
Loading...
Need help?
General
