METHOD FOR TURNING WHILE TRAVELING ON DOWNHILL
METHOD FOR TURNING THE MACHINE GRADUALLY WHILE TRAVELING FOR-
WARD
When gradually turning to the left, tilt joystick (steering, direc-
tional and gear shift lever) forward and tilt it to left (L) halfway.
Cross steering does not occur.
REMARK
When gradually turning to the right, tilt joystick (steering, direc-
tional and gear shift lever) forward and tilt it to right halfway.
Cross steering does not occur.
PRECAUTIONS FOR OPERATION
WATCH GAUGES
If the power train oil temperature caution lamp lights up during operation, reduce the load and wait for the tem-
perature to go down.
PERMISSIBLE WATER DEPTH
In water, use the machine only in the depth range where the
track frame top is above the water surface. If the cooling fan
enters water, it may be broken. In particular, take care that the
machine does not pitch forward.
(A): Allowable water depth
After working in water for long hours, supply grease to the
greasing points of the work equipment and equalizer bar.
For the greasing method, see “METHOD FOR LUBRICATING
(4-44)”.
PRECAUTIONS FOR LONG-TIME CONTINUOUS TRAVEL OPERATION
Avoid operating the machine at high speed for a long time, oth-
erwise the temperature of lubricating oil sharply rises, and that
can cause oil leakage from the track rollers or final drive and
lower durability.
If there is no way to avoid operating the machine at high speed
for a long time, stop the machine every one hour for 30 minutes
and let the track rollers and final drive cool off before starting
up the machine again.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-188
To Next Page
Loading...
Need help?
General
