METHOD FOR PARKING MACHINE
WARNING
• Avoid a sudden stop. Stop the machine gradually.
• Park the machine on a firm and level place.
Do not park the machine on a slope.
If you have to park on a slope, set parking brake lever
(4) to LOCK position, block the track, and thrust the
work equipment into the ground to prevent movement
of the machine.
• If the work equipment control lever is touched by acci-
dent, the work equipment may suddenly move, and
this may cause serious personal injury or death. Be-
fore leaving the operator's seat, always set work
equipment lock lever (7) to LOCK position.
1.
Depress brake pedal (1) to apply the brake.
NOTICE
• If you depress the brake pedal when the engine
speed or travel speed is high, the brake disc may
make a slipping sound. When you depress the
brake pedal usually, depress the decelerator pedal
(2) and decrease the engine speed and travel
speed. In an emergency, immediately depress the
brake pedal to stop the machine..
• Do not rest your foot on the brake pedal except
when you apply the brake.
2.
Set joystick (steering, directional and gear shift lever) (3) to
N (Neutral) position.
3.
Set parking brake lever (4) to LOCK position (L).
MACHINE OPERATIONS AND CONTROLS OPERATION
3-206
To Next Page
Loading...
Need help?
General
