PRECAUTIONS WHEN PERFORMING THE SERVICE WORK
Always pay attention to “Safety” before starting any work — this is important.
Never attempt any work where danger to yourself or to other persons.
Whenever work requiring safety precautions are described in this manual, a flag mark
inserted, always make double sure that safety measures are taken.
Other unmarked work, should always be performed after studying and using your
common sense to prevent accidents.
DESCRIPTION OF THE SYMBOLS
The symbols described below are used in this manual for convenience and better understanding.
Symbol Item Description
Safety Special safety precautions are needed to perform the work.
Note Special technical precautions are needed to perform the work
Tightening torque Fastening parts that require specified tightening force when assembling.
Weight Weight of parts or systems
Coat Places to be coated with adhesives, etc. when assembling
00-2 EX20 Series
To Next Page
Loading...
Need help?
General
