bizhub C3850/C3350 3-7
3.2 Using LPR/Port9100 connection for installation
3
3.2.2 Installing the printer driver by creating a new port
In Windows 8/Server 2012
The procedure for installing the printer driver by creating a new port is as follows:
0 Administrator privileges are required to perform this task.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
2 Display the printer window.
% In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Hardware and
Sound] - [View devices and printers].
% In Windows Server 2012, open the Start window, then click [Control Panel] - [Hardware] - [View de-
vices and printers].
3 Select Add a printer.
4 In the window showing the detected printer, click [The printer that I want isn't listed].
5 Click [Add a local printer or network printer with manual settings].
6 Click [Create a new port:], then select [Standard TCP/IP Port].
7 Click [Next].
8 Select [TCP/IP Device], then enter the IP address.
9 Click [Next].
10 Click [Have Disk...].
11 Click [Browse...].
12 Select the folder on the CD/DVD-ROM containing the desired printer driver, then click [Open].
% Select the folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver, PS driver, and XPS driver
13 Click [OK].
The [Printers] list appears.
14 Click [Next].
15 Follow the on-screen instructions to carry out operations.
% If the [User Account Control] window appears, click [Continue] or [Yes].
16 Click [Finish].
17 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Devic-
es and Printers] window.
18 Remove the CD/DVD-ROM from the CD/DVD-ROM drive.
Installation of the printer driver is then completed.
To Next Page
Loading...
Need help?
General
