3-8 bizhub C3850/C3350
Using LPR/Port9100 connection for installation
3
3.2
In Windows Vista/7/Server 2008/Server 2008 R2
The procedure for installing the printer driver by creating a new port is as follows:
0 Administrator privileges are required to perform this task.
0 Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
2 Display the printer window.
% In Windows 7/Server 2008 R2, open the Start menu, then click [Devices and Printers]. If
[Devices and Printers] is not displayed, select [Control Panel] - [Hardware and Sound], and click
[View devices and printers]. When [Control Panel] is displayed in an icon view, double-click [Devices
and Printers].
% In Windows Vista/Server 2008, click the Start menu, and select [Control Panel] - [Hardware and
Sound] - [Printers]. When [Control Panel] is displayed in Classic View, double-click [Printers].
3 Select Add a printer.
The [Add Printer] wizard appears.
4 Click [Add a local printer].
The [Choose a printer port] dialog box appears.
5 Click [Create a new port:], then select [Standard TCP/IP Port].
6 Click [Next].
7 Select [TCP/IP Device], then enter the IP address.
8 Click [Next].
% If the [Additional Port Information Required] or [More Port Information Required] dialog box appears,
go to Step 9.
% If the [Install the printer driver] dialog box appears, go to Step 12.
9 Select [Custom], and then click [Settings...].
10 Change the settings according to the port, and then click [OK].
% For an LPR connection, select the [LPR] check box, then enter "Print" in [Queue Name:]. You must
discriminate between upper and lower case letters when entering it.
% For the Port 9100 connection, select the [Raw] check box, then enter a RAW port number ([9100]
by default) in [Port Number:].
% If both LPR and Port9100 are enabled on this machine, the printer driver is connected to this ma-
chine using LPR.
11 Click [Next].
The [Install the printer driver] dialog box appears.
12 Click [Have Disk...].
13 Click [Browse...].
14 Select the folder on the CD/DVD-ROM containing the desired printer driver, then click [Open].
% Select the folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver, PS driver, and XPS driver
15 Click [OK].
The [Printers] list appears.
16 Click [Next].
To Next Page
Loading...
Need help?
General
