bizhub C3850/C3350 1-47
1.5 Available operations in Administrator mode
1
[Default Settings] - [XPS Settings]
To display: Administrator mode - [Print] - [Default Settings] - [XPS Settings]
Specify whether or not to perform the verification of a digital signature or printing of error information when
directly printing an XPS file.
[Image Printing] Select the RGB image data processing method.
• [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci-
fied by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Photographic] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Composite Black] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
[Text Printing] Select the RGB text data processing method.
• [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci-
fied by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Black and Gray] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
[Graphics Printing] Select the RGB graphic data processing method.
• [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci-
fied by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray Treatment]: Specify the printing method of black and gray
colors. [Black and Gray] is specified by default.
• [Destination Profile]: Specify the output profile. [Auto] is specified by de-
fault.
[Simulation] Configure the simulation settings.
• [Profile]: Select the simulation profile for input CMYK. [None] is specified by
default.
• [Intent]: Specify the color conversion property for simulation. [Relative
Color] is specified by default.
• [CMYK Gray Treatment]: Specify the printing method of plate K in the
CMYK input data for simulation. [Composite Black] is specified by default.
Item Description
Item Description
[Digital Signature] Select whether or not to verify a digital signature when an XPS file with a digital
signature is printed.
When [Enable] is selected, the data is not printed if the signature is invalid.
[Disable] is specified by default.
[Print to XPS Error] Select whether or not to print error information when an error occurs when an
XPS file is being printed.
[On] is specified by default.
To Next Page
Loading...
Need help?
General
