1-64 bizhub C3850/C3350
Available operations in Administrator mode
1
1.5
[SMB Settings] - [WINS/NetBIOS Settings]
To display: Administrator mode - [Network] - [SMB Settings] - [WINS/NetBIOS Settings]
Register the WINS server when it is installed to resolve the name.
[SMB Settings] - [SMB Client Settings]
To display: Administrator mode - [Network] - [SMB Settings] - [SMB Client Settings]
Configure settings to enable use of the SMB client function of this machine.
Item Description
[WINS/NetBIOS] Select whether or not to use the WINS server.
[Enable] is specified by default.
[WINS Automatic Re-
trieval]
Select whether or not to automatically obtain the address of the WINS server.
This item is necessary when DHCP is enabled.
[Enable] is specified by default.
[WINS Server Address
1]
[WINS Server Address
2]
Enter the WINS server address when manually specifying it.
Use the following entry formats.
• Example of entry: "192.168.1.1"
[Node Type] Select the name resolution method.
• [B Node]: Query by broadcast.
• [P Node]: Makes inquires to the WINS server.
• [M Node]: Makes inquiries to the broadcast and WINS server in sequence.
• [H Node]: Makes inquiries to the WINS server and broadcast in sequence.
[H Node] is specified by default.
Item Description
[SMB Client] Select whether or not to use the SMB client function of this machine.
Using this function, you can to send the scanned original data to a shared fold-
er of a computer.
[Enable] is specified by default.
[Authentication] Select an authentication method for SMB transmission according to your en-
vironment.
• [NTLM v1]: Performs the NTLMv1 authentication. This option is available in
the NT domain environment.
• [NTLM v2]: Performs NTLMv2 authentication. This option is available in the
NT domain environment.
• [NTLMv1/v2]: Performs NTLMv1 authentication when NTLMv2 authentica-
tion fails. This option is available in the NT domain environment.
• [Kerberos]: Performs Kerberos authentication. This option is available in
the Active Directory domain environment.
• [Kerberos, NTLMv1/v2]: NTLMv2 authentication is performed when Ker-
beros authentication fails, and NTLMv1 authentication is performed when
NTLMv2 authentication fails. This option is available when both the Active
Directory and NT domains are specified.
[NTLM v1] is specified by default.
[DFS] Select whether or not to use DFS when the distributed file system (DFS) is em-
ployed.
[Enable] is specified by default.
[Default Domain Name] Enter the default domain name to be added to the destination host name when
data is sent using SMB (using ASCII characters of up to 64 bytes).
If the domain name of the destination is not specified by the user when sending
data using SMB, the domain name specified here is added. This item is not re-
quired when Active Directory is used as an authentication server.
To Next Page
Loading...
Need help?
General
