12 SERVICE WORK ON THE CHASSIS
68
V00341-10
–
Remove screws
2
. Take off front fender.
12.15 Installing front fender
V00341-11
Main work
–
Position front fender. Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
V00340-11
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the headlight mask with the headlight. ( p. 114)
– Check the headlight setting. ( p. 116)
12.16 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 59)
– Remove the seat. ( p. 70)
– Remove the frame protector. ( p. 72)
– Remove main silencer. ( p. 75)
To Next Page
Loading...
Need help?
General
