EasyManuals Logo
Home>KTM>Motorcycle>450 XCR-W USA

KTM 450 XCR-W USA User Manual

KTM 450 XCR-W USA
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
01/FORK, TRIPLE CLAMP 17
400189-10
ಥ Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
» If there is noticeable play present:
(EXC-RSIXDAYS, XCR-WUSA)
ಥ Adjust play of the steering head bearing. ( P. 17)
(EXC-REU, EXC-RAUS/UK, EXC-RUSA, XCR-WZA)
ಥ Adjust play of the steering head bearing. ( P. 17)
ಥ Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
» If click positions are noticeable:
(EXC-RSIXDAYS, XCR-WUSA)
ಥ Adjust play of the steering head bearing. ( P. 17)
(EXC-REU, EXC-RAUS/UK, EXC-RUSA, XCR-WZA)
ಥ Adjust play of the steering head bearing. ( P. 17)
ಥ Check the steering head bearing and replace if required.
ಥ Remove the motorcycle from the work stand. ( P. 8)
Adjusting play of steering head bearing (EXC-RSIXDAYS, XCR-WUSA)
ಥ Jack up the motorcycle. ( P. 8)
500103-11
ಥ Loosen screw. Remove screw.
ಥ Loosen and retighten screw
.
Specification
Screw, top steering head M20x1,5 10Nm
(7.38lbfft)
ಥ Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
ಥ Fully tighten screw
.
Specification
Screw, top triple clamp M8 17Nm
(12.54lbfft)
ಥ Mount and tighten screw
.
Specification
Screw, top steering stem M8 17Nm
(12.54lbfft)
Loctite
®
243â„¢
ಥ Check play of steering head bearing.
Adjusting play of steering head bearing (EXC-REU, EXC-RAUS/UK, EXC-RUSA, XCR-WZA)
ಥ Jack up the motorcycle. ( P. 8)
100022-10
ಥ Loosen screws and.
ಥ Loosen and retighten screw
.
Specification
Screw, top steering head M20x1,5 10Nm
(7.38lbfft)
ಥ Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
ಥ Fully tighten screw
.
Specification
Screw, top triple clamp M8 20Nm
(14.75lbfft)
ಥ Tighten screw
.
Specification
Screw, top steering stem M8 20Nm
(14.75lbfft)
ಥ Check play of steering head bearing.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 450 XCR-W USA and is the answer not in the manual?

KTM 450 XCR-W USA Specifications

General IconGeneral
BrandKTM
Model450 XCR-W USA
CategoryMotorcycle
LanguageEnglish

Related product manuals